Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Driver's Door Panel on a Suzuki Swift

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Door trim panel

Removing the driver's door panel on a Suzuki Swift, this video explains how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Using a screwdriver, unscrew the retaining bolts in the handle located inside the door panel, and unscrew the bolts in the plastic of the door opening lever. Use the lever to detach the retaining clips around the perimeter of the door panel. Finally, grip the panel with your hands and lever it off the door (disconnect the power connector). Reassemble everything in reverse order.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to lock and unlock the locks from inside the Suzuki Swift
How to lock and unlock the locks from inside the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) In this short guide, we will see the instructions that will allow us to open and close the doors from the inside of the Suzuki Swift. First of all, w…
Removing the Door Panel on Suzuki Swift
Removing the Door Panel on Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) In this video, you will see how to remove the door panel of a second series Suzuki Swift. First, open the front door and unscrew the fastening screws…
Where is the OBD2 Port on a Suzuki Swift?
Where is the OBD2 Port on a Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) If you want to access the OBD2 port inside your Suzuki Swift, simply follow the steps described in this guide. First, open the driver's side door and…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos