Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Rack End on Suzuki SX4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Control arm

See other generations:
Video tutorial

Let's look at removing the steering rack end on a Suzuki SX4: position your car on a column lift or jack and raise it to a comfortable height. Undo the wheel nuts with a socket wrench or air impact gun and remove the wheel.

Next, start unscrewing the nuts of the steering rack end with a socket wrench. Remove the nuts located under the steering rack end and the stabiliser bar, then pull the steering rack end away from the vehicle body.

Fit the new steering rack end, then screw it in with all the attached nuts. Finally, refit the wheel with the nuts.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

Replacement of the Thermostat on the Suzuki SX4
Replacement of the Thermostat on the Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) This short guide will show you the main instructions on how to remove and replace the thermostat on the Suzuki SX4. First, open the bonnet of the veh…
Change Rear Headlight Bulb on a Suzuki Sx4
Change Rear Headlight Bulb on a Suzuki Sx4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Changing the bulbs on a Suzuki Sx4? Remove the rear headlight bulbs on a Suzuki Sx4. Open the boot lid, and using a screwdriver, unscrew the securing…
How to Remove the Door Panel on the Suzuki SX4?
How to Remove the Door Panel on the Suzuki SX4?
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To replace the door panel on the Suzuki SX4, you need to loosen the screw located near the window switch panel and the one found in the handle recess…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos