Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the radio from a Suzuki S-Cross

Model: Suzuki S Cross MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

In this video, we see how to remove the radio from a Suzuki S-Cross: we start by pressing the hazard button to remove it and disconnect the electrical connector underneath. The next step is to remove the air vents on the sides of the button.

We can do this easily by using a small plastic spatula to pry them off. Underneath, we find the screws that hold the top part of the radio in place: we unscrew them with a long enough screwdriver, and then using the same spatula, we pry around the radio to remove it completely.

Disconnect the antenna and electrical connector, and the operation is complete.


Posted on 19 May 2025 by ScegliAuto


Related tutorials

How to Replace the Gear Knob of the 2017 Suzuki S-Cross
How to Replace the Gear Knob of the 2017 Suzuki S-Cross
Suzuki S Cross (2013-2019 / MK 1) .. the gear knob in your first series Suzuki S-Cross (2017) is quite simple. To complete the operation, follow the procedure described in this guide... …
Where to Find the OBD2 Port on the Suzuki S Cross 2
Where to Find the OBD2 Port on the Suzuki S Cross 2
Suzuki S Cross (2021-2026 / MK 2) .. of you who own a second-generation Suzuki S Cross, we will help you easily find the OBD2 port, which allows you to connect a diagnostic tool directly.. …
How to Reset the Tyre Pressure Light on a Suzuki S-Cross?
How to Reset the Tyre Pressure Light on a Suzuki S-Cross?
Suzuki S Cross (2013-2019 / MK 1) .. To reset the tyre pressure light on the Suzuki S-Cross, turn on the ignition by inserting the key and turning it. Once the ignition is on, navigate the.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos