Do it yourself
Frequently asked questions about cars and motorcycles

How to change coils and spark plugs on the Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Spark plugs

Let's see how to replace coils and spark plugs on the Suzuki Swift: Open the hood; the coils are the 4 black components in the center of the engine, each with an electrical connector, and disconnecting them will be the first thing we do. Using a 10 mm socket wrench, we unscrew the bolt that secures the coil, then we remove the coil along with its rubber cap. We insert the new coil (we can find a complete kit of 4 coils and 4 spark plugs on eBay with the code 227043385955 for the price of 111.92 euros, with free shipping) into the same hole, pushing it down firmly to ensure the rubber cap attaches to the spark plug, then we re-screw and reconnect it. The video shows the spark plugs but does not change them: after removing the coil, we clean the bottom of the well. We will find the spark plug, which we will remove using a socket extension and a ratchet; unscrew it counterclockwise and manually insert the new spark plug to avoid damaging the threads. We tighten it half a turn with the wrench, then reassemble the coil.

Posted on 6 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) In this video tutorial, you will see how to remove and replace the engine spark plugs on a third-generation Suzuki Swift. First, open the engine bonn…
Suzuki Swift (2004-2010 / MK 4, Rs41) Before you can begin, open the bonnet of your Suzuki Swift. Start by unscrewing and removing the screws that secure the air filter housing and its as…
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) To replace the spark plugs of the Suzuki Swift, open the bonnet to access the components located at the top of the engine bay. Here, detach the plast…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos