|
Do it yourself
| |||
| ||||
How to replace the spark plugs of the Suzuki Swift
Model: Suzuki Swift
MK 3
- Years 1994-2004
Today we will explain how to independently replace the spark plugs of the Suzuki Swift model mk3. We begin the replacement by opening the front hood of the car. Using a flat-tip screwdriver, lift the clips of the air filter cover and with a socket wrench n°10, unscrew the fastening device of the filter housing. Disconnect the air tube and using a socket wrench n°8, remove the engine cover. We then proceed with the replacement of the spark plugs, disconnect the high tension cables of the spark plugs with a flat-tip screwdriver. Immediately after, unscrew the fastening screws of the ignition coil using a socket wrench n°10 and disconnect the spark plugs from the ignition coil with a flat-tip screwdriver. Using the spark plug removal tool, remove the spark plugs and place them on a work surface in the order they were installed in the engine. Apply a thin layer of special grease on the threaded surface of the new spark plugs. Connect the ignition coil to the spark plug and screw in the fastening screws. Connect the high tension cables of the spark plugs and finish by closing the engine cover. Mount the air filter box and the air tube before closing the front hood.
Posted on 18 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Suzuki Swift
(2010-2017 /
Rs41, AZG, MK 5)
To replace the spark plugs of the Suzuki Swift, open the bonnet to access the components located at the top of the engine bay. Here, detach the plast…
Suzuki Swift
(2004-2010 /
MK 4, Rs41)
To replace the spark plugs on a Suzuki Swift, open the bonnet to access the screws securing the plastic cover on top of the engine block. Once the co…
Suzuki Swift
(1994-2004 /
MK 3)
To replace the spark plugs on a Suzuki Swift, open the bonnet to access the components inside the engine bay. You will need to unscrew the screws sec…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.560
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |