Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs of a Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Headlight bulb

Learn how to replace the bulbs located in the front headlamp of a Suzuki Swift. Open the front bonnet by pulling the lever located at the bottom right of the dashboard (secure it with the prop rod). Locate the rubber inspection cap (at the back of the headlamp) and remove it. You will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the damaged bulbs using a screwdriver. Fit the new bulbs (always of the correct type and size) and insert the bulb holder back into the headlamp housing. Close the inspection compartment with the cap and test the lights.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Headlight Bulbs on a Suzuki Swift
Remove the Headlight Bulbs on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Remove the headlight bulbs and replace them on a Suzuki Swift. Open the bonnet by pulling the lever located at the bottom right of the dashboard and …
How to Replace the Rear Light Bulbs on a Suzuki Swift
How to Replace the Rear Light Bulbs on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) In this brief guide, see the steps to remove and replace the rear light bulbs on a Suzuki Swift. First, open the boot lid and start unscrewing the fi…
How to replace the rear tail light of the Suzuki Swift - Maruti Swift
How to replace the rear tail light of the Suzuki Swift - Maruti Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Today's information will allow us to disassemble and replace the rear taillight of the Suzuki Swift, as well as the Maruti Swift. First, we open the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos