Do it yourself
| ||||
|
Suzuki Vitara - Video tutorial
Model: Suzuki Vitara
TA, ET, MK 1
- Years 1988-1998 Disassembling the fuel pump on a Suzuki Vitara? Let's see the disassembly of the pump directly from inside the tank. We lift the car with a jack, we find the clamping screws around the tank. We unscrew all the tightening screws with a socket wrench. We bring the tank ashore. We remove the fuel pump from inside the tank (we disconnect the electrical operating terminals). We mount the new pump inside the tank, screw in the clamping screws after connecting the electrical terminals. We mount the tank under the floor of the car. We turn on and test the vehicle.
Posted on 11 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |