Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Speakers and Door Panel on Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years 2005-2015
Part: Speaker

In this tutorial, you will learn how to remove the speaker from a Suzuki Grand Vitara. First, remove the door panel. Open the door and use a screwdriver to take off the cover behind the grab handle: underneath, you will find a screw to undo. Always use a sharp tool to remove the handle trim. At this point, start prising from the sides in multiple points to begin releasing it: remove the cover of the window switch and disconnect the electrical connector. Now, detach the door panel. Undo the screws to remove the speaker!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Speakers from a Grand Vitara
Removing the Speakers from a Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Want to replace the speakers in your Grand Vitara? Here’s how to remove the door panel and speaker. Use a lever to pry off the plastic trim at the co…
How to Remove the Rear Door Panel of a Suzuki Grand Vitara?
How to Remove the Rear Door Panel of a Suzuki Grand Vitara?
Suzuki Grand Vitara (2015-2024 / MK 3) To remove the rear door panel of the Suzuki Grand Vitara, use a tool to pry off the trim around the internal door handle. Once this trim is removed, …
How to disassemble the door speaker of a Suzuki Grand Vitara?
How to disassemble the door speaker of a Suzuki Grand Vitara?
Suzuki Grand Vitara (2005-2015 / MK 2) To disassemble the door speaker of a Suzuki Grand Vitara, you need to follow some steps. Start by removing the door panel. To do this, use a flathead…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos