|
Do it yourself
| |||
| ||||
Removing the Tailgate Handle on a Suzuki Grand Vitara
Model: Suzuki Grand Vitara
MK 1
- Years 1999-2005
First, detach the tailgate panel, which is simply clipped in place: use a plastic trim tool or a small flat screwdriver to gradually unclip it from the door. At this point, move the underlying cover just enough to access the inside of the handle. In this area, unscrew the four nuts present, and you will see that the handle is no longer secured. You can then pull it out by hand, or assist with the trim tool, and proceed to fit the new handle by clipping it in place and tightening the rear nuts.
Updated on 4 April 2026 by ScegliAuto
Video tutorial
Related tutorials
…
Suzuki Grand Vitara
(2005-2015 /
MK 2)
Start by unlocking and lifting the rear tailgate until it is fully open. Remove the securing screws located at the top of the bumper, then take out t…
Suzuki Grand Vitara
(2005-2015 /
MK 2)
In this tutorial, you will learn how to remove the speaker from a Suzuki Grand Vitara. First, remove the door panel. Open the door and use a screwdri…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |