Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dashboard Lights on a Suzuki Jimny

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Instrument cluster

Start by removing the large trim around the instrument cluster. To do this, use a plastic lever and pry it in the various available gaps. Be careful as this trim also contains the plastic vents. Once you reach this point, simply unscrew the fixing screws of the cluster, as shown in the video, using a crosshead screwdriver. Pull the instrument cluster out of its housing, and from the back, unscrew the various bulbs, removing them from the cluster, then disconnect them from the holder and insert the new ones. Reinsert the cluster into its housing and the fixing screws, then reverse the process until fully reassembled.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located on the Suzuki Jimny?
Where are the fuses located on the Suzuki Jimny?
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) All fuses on the Suzuki Jimny are divided within specific fuse boxes installed in the vehicle: this model has two fuse boxes. The first is located in…
Disassembly and replacement of the front bumper grille of the Suzuki Jimny.
Disassembly and replacement of the front bumper grille of the Suzuki Jimny.
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) Today we will see the instructions that will allow us to disassemble and replace the front bumper grille of the Suzuki Jimny. As a first step, we ope…
How to replace the bulb of the ceiling lights of the Suzuki Jimny
How to replace the bulb of the ceiling lights of the Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) Today we will explain how to replace the interior light bulb of a Suzuki Jimny vehicle on your own and with simple steps. The bulb we will use is a G…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos