Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Suzuki SX4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Diesel fuel filter

In this video, you will learn how to remove and replace the diesel filter on a Suzuki SX4, as well as on a Fiat Sedici with the same engine. First, open the bonnet of your car and start by removing the intake hose. Then disconnect the battery by unscrewing the two terminals, and remove the air filter box by unscrewing the fixing screws. Next, remove the diesel filter pipe by disconnecting the electrical connector. Now remove the filter and replace it with a new one of the correct type, as shown in the video.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on a Suzuki SX4?
How to Replace the Diesel Filter on a Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) To replace the diesel filter on a Suzuki SX4, open the bonnet to access the components in the engine bay: the diesel filter is located immediately un…
How to Replace the Wiper Blades on a Suzuki SX4
How to Replace the Wiper Blades on a Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In this video tutorial, see how to replace the front wiper blades on a Suzuki SX4 by following a few simple steps that will help you manage your vehi…
How do you replace the license plate bulb on the Suzuki SX4?
How do you replace the license plate bulb on the Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) It will be possible to replace the license plate bulb of the Suzuki SX4 by prying with an object to remove the device from its housing: once the old …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos