Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Antenna and Cable on Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Antenna

See other generations:
Video tutorial

Using a flat screwdriver, remove the rear light units as shown in the video. At this point, extract the bulb and dismantle the light unit cover, then unscrew the connector.

Unscrew and remove the two sun visors. Remove the seals and upper door handles, then the pillar trims.

Also, remove the front light unit using a plastic wedge. Fold the rear seats forward and remove the tailgate seal.

Continue dismantling the internal trims so you can work on the antenna cable, following the work plan shown in the video.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Replacing the Antenna on a Suzuki Grand Vitara
Replacing the Antenna on a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Here are the instructions to remove and replace the antenna on the Suzuki Grand Vitara. First, move to the rear of the vehicle and start unscrewing t…
How to Replace the Key Battery in a Suzuki Grand Vitara
How to Replace the Key Battery in a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the lower section of the key of your Suzuki Grand Vitara, and then lever it ope…
How to Remove the Clutch from a Suzuki Grand Vitara
How to Remove the Clutch from a Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) Begin by lifting your Suzuki Grand Vitara, then remove the driveshaft, the lower cover supporting the gearbox, and anything else obstructing the extr…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos