Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Alternator Belt on the Suzuki Grand Vitara MK1

Model: Suzuki Grand Vitara MK 1 - Years 1999-2005
Part: V-belt

Today, in this video tutorial, you will learn how to remove and replace the V-belt or alternator belt on the Suzuki Grand Vitara first series, following the instructions below. First, open the bonnet and start loosening the belt tensioner using a 12 mm spanner; then remove the alternator belt, as shown in the video. At this point, replace the belt with the new one, ensuring it is fitted in the correct direction; manually rotate to verify that the belt is installed perfectly!

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Alternator in a Suzuki Grand Vitara 2.5 V6
How to Replace the Alternator in a Suzuki Grand Vitara 2.5 V6
Suzuki Grand Vitara (1999-2005 / MK 1) This guide outlines the steps to remove and replace the alternator in a Suzuki Grand Vitara with a 2.5 litre V6 engine. First, open the bonnet of you…
How to Replace the Serpentine Belt on a Suzuki Grand Vitara 2.5L V6?
How to Replace the Serpentine Belt on a Suzuki Grand Vitara 2.5L V6?
Suzuki Grand Vitara (1999-2005 / MK 1) This guide outlines the steps to remove and replace the serpentine belt on a Suzuki Grand Vitara 2.5L V6. First, open the bonnet and begin by removin…
Replacement of the timing belt of the Suzuki Grand Vitara 2.0 TD
Replacement of the timing belt of the Suzuki Grand Vitara 2.0 TD
Suzuki Grand Vitara (1999-2005 / MK 1) Today's main instructions will show us how to disassemble and replace the timing belt of the Suzuki Grand Vitara 2.0 TD. First, we open the hood of t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos