Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Suzuki Swift 1.2 Petrol

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Service warning light

In today's tutorial, you will learn how to reset the service light for the regular maintenance oil change on a Suzuki Swift third generation with a 1.2 petrol engine by following these instructions. First, get inside the vehicle and turn on the ignition; then press the button located on the right side of the instrument panel, holding it until the light starts to flash. At this point, turn off the ignition and start the engine, checking that the maintenance light has indeed reset!

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…
How to Reset the Warning Light on Suzuki Swift
How to Reset the Warning Light on Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Reset the service light on a Suzuki Swift? Here's how to reset the oil service warning light. Turn on the instrument cluster of the Suzuki with the k…
How to reset the service light on the Suzuki Swift
How to reset the service light on the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Below we will see how to reset the regular maintenance warning (service) of the Suzuki Swift. First, we get inside the vehicle and start turning on t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos