Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Poly-V Belt on Suzuki Swift

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: V-belt

Open the bonnet and place the support rod. Unscrew the two 12 mm bolts holding the alternator and, using an 8 mm Allen key, unscrew the bolt located at the lower rear (it is quite hidden), as shown in the video. Once the bolts are loosened, the belt will no longer be under tension, allowing you to move the various parts to extract it: however, be careful to remember exactly how it was fitted, or if you feel unsure, take photos before removing it. Once done, fit the new belt you purchased exactly as the original was fitted, then tighten the bolts.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on a Suzuki Swift 1.6 16V
Replacing the Timing Belt on a Suzuki Swift 1.6 16V
Suzuki Swift (2004-2010 / MK 4, Rs41) In this video tutorial, you will see the main steps to remove and replace the timing belt on a Suzuki Swift 1.6 16V. First, lift the vehicle and remo…
Replacing the Timing Chain on a Suzuki Swift
Suzuki Swift (1994-2004 / MK 3) Replacing the engine chain on a Suzuki Swift, here’s how. Lift the car on a column lift; remove the front wheel and the right wheel arch liner. Once …
How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos