Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Engine Oil and Filter

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Engine oil

This video shows how to remove and replace the oil and its filter on your car's engine. First, start the car for a few minutes to warm it up; this helps with the complete drainage of the oil. Once you locate the drain plug on the oil sump, place a container underneath and slowly unscrew it to let the used oil flow into the container. After this, remove the oil filter and replace it; finally, from the oil filler cap located in the engine bay, add the necessary amount of new oil.

Updated on 11 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the oil filter of the Suzuki Ignis located?
Where is the oil filter of the Suzuki Ignis located?
Suzuki Ignis (2016-2024 / MK 3) In the previous videos, we saw how to proceed with the oil change on a 2016 Suzuki Ignis vehicle, an operation that can easily be done independently.…
How to Change the Engine Oil on a 2017 Suzuki Ignis
How to Change the Engine Oil on a 2017 Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) If you want to DIY the engine oil and filter change on this model of car, follow the steps outlined below. After opening the bonnet and lifting the v…
How to Replace the Cabin Filter on the Suzuki Ignis?
How to Replace the Cabin Filter on the Suzuki Ignis?
Suzuki Ignis (2003-2008 / MK 2) To replace the cabin filter on the Suzuki Ignis, open the glove compartment located on the passenger side. Once open, detach the internal fixing clip…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos