Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Oil and Oil Filter on the Suzuki Vitara

Model: Suzuki Vitara LY - Years 2015-2024
Part: Engine oil

To replace the oil and oil filter on the Suzuki Vitara, start by raising the front of the car, unscrew the oil filler cap, go underneath the car, and using a T45 Torx key, unscrew the oil drain plug and let the oil drain into a container; while the oil is draining, go back to the car and unscrew the oil filter housing with a 27 mm socket, being careful not to let the oil spill; once the filter housing is unscrewed, detach the old filter from the housing and remove the housing seal; now take the new filter and the new seal for the cap, install the seal and the new filter, and screw it back into place; after the oil has drained and the filter has been replaced, go underneath the car and screw the oil drain plug back in; now insert a funnel into the oil filler cap, pour in the litres of oil specified by the manufacturer, when you are close to the specified litres check the level with the dipstick (the level should be checked a second time after removing the dipstick) if the oil level is at the max mark, the level is correct, otherwise top up and finally screw the oil filler cap back on.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Vitara (2005-2015 / JT) The oil filter on a Suzuki Vitara is located underneath the vehicle. To access it, you will need to lift the car. Before starting, remove all the oil…
Suzuki Vitara (2015-2024 / LY) This guide will show us how to replace the engine oil and oil filter, performing the regular maintenance check on the Suzuki Vitara; we will also see…
Suzuki Vitara (1988-1998 / TA, MK 1, ET) Want to replace the engine oil in a Suzuki Vitara? Let's also replace the filter. Lift the front bonnet, locate the oil filter. Unscrew the worn oil …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos