Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Oil Filter on a Suzuki Vitara

Model: Suzuki Vitara JT - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Oil filter

See other generations:
This video is currently unavailable

The oil filter on a Suzuki Vitara is located underneath the vehicle. To access it, you will need to lift the car. Before starting, remove all the oil from the engine to prevent spills during the replacement.

Begin by unscrewing the oil filter using the appropriate tool. If any oil spills out, wait for it to drain completely.

Once fully drained, remove the oil filter. To install the new filter, simply reverse these steps.

This will complete the replacement, allowing you to add new oil to the engine.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Suzuki Vitara (1988-1998 / MK 1, TA, ET) Want to replace the engine oil in a Suzuki Vitara? Let's also replace the filter. Lift the front bonnet, locate the oil filter. Unscrew the worn oil …
Suzuki Vitara (2015-2024 / LY) Good morning, today’s objective is to reset the "Service" light on your Suzuki Vitara. Start by sitting in the driver’s seat, then turn on the instru…
Suzuki Vitara (2005-2015 / JT) The steps to replace the remote battery on a Suzuki Vitara are simple and quick. Take the remote and use a flat-head screwdriver to pry open the edge…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos