Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Suspension Arms on a Suzuki Sx4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Control arm

See other generations:
Video tutorial

To replace the suspension arm on a Suzuki Sx4, start by raising the car. Remove the wheel bolts and take off the wheel. Once the wheel is removed, turn the steering wheel to the right.

Using a 14 mm socket at one end and a spanner at the other, undo the bolt that secures the arm to the brake disc hub, then tap it gently to release the arm's pin from the hub, using a lever if necessary. With a 17 mm socket, remove the other two bolts of the arm, using a lever to assist.

After removing the old arm, take the new one and position it by first inserting the vertical bolt, then the horizontal bolt, and tighten them with a 17 mm socket. Now, by adjusting the hub and the arm, insert the pin into the wheel hub and secure it with a 14 mm socket on one side and a 14 mm spanner on the other.

Finally, refit the wheel and repeat the same process on the left side.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Suzuki SX4
How to Replace the Cabin Air Filter on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Today, we will guide you through the steps to remove and replace the cabin air filter on a Suzuki SX4 in simple and quick steps. First, get inside th…
How to Replace the Battery in a 2006 Suzuki SX4
How to Replace the Battery in a 2006 Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this guide for all owners of a first-generation Suzuki SX4 (2006), you will learn how to correctly and safely replace the battery. First, park the…
How to reset the tire pressure on Suzuki SX4
How to reset the tire pressure on Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the tire pressure on the Suzuki SX4, you can follow these general steps. Turn on the car: make sure all tires are inflated to the correct pr…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos