Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Light Bulb of the Suzuki Swift

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

Below are the instructions on how to remove and replace the rear light or stop bulb of the Suzuki Swift in simple, quick steps. First, open the boot and begin unscrewing the fixing screws located on the side of the light; then gently remove the light from the bodywork, disconnecting the electrical connectors of the bulbs to remove and replace them with new ones (by rotating the connector a quarter turn), as shown in the video.

At this point, install the new bulb and refit everything!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Replace the Position Light Bulb on a Suzuki Swift Mk4
How to Replace the Position Light Bulb on a Suzuki Swift Mk4
Suzuki Swift (2004-2010 / MK 4, Rs41) This guide shows how to replace the parking light bulb on the Suzuki Swift Mk4. Replacing the position light bulbs is a very simple task. First, open…
How to Replace the Interior Bulb of a Suzuki Swift?
How to Replace the Interior Bulb of a Suzuki Swift?
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Hello and welcome back to Scegliauto.com! Today, you will replace the interior light bulb of your Suzuki Swift. Start by sitting in the driver's seat…
How to Replace the Front Headlamp Bulb of the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) This guide briefly describes the process of removing and replacing the front headlamp bulb of the Suzuki Swift in simple steps. First, open the bonne…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos