Do it yourself
| ||||
|
Suzuki Grand Vitara - Video tutorial
Model: Suzuki Grand Vitara
MK 2
- Years 2005-2015 In this short and simple guide, we will see how to disassemble and replace the rear brake shoes of the Suzuki Grand Vitara. The rear brake shoes need to be replaced when we notice that the handbrake is starting to not work properly; so we lift the car and remove the wheel, unscrewing the drum screws to remove it and access the brake shoes, as shown in the video. At this point, we disconnect the connecting spring of the brake shoes and remove the pin to remove it from the brake plate, giving the caliper a clean from any remaining dirt; then we reassemble everything!
Posted on 13 August 2023 by ScegliAuto
Other guides that may interest you
|
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |