Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Battery on the Suzuki Swift

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

The battery that powers the remote for the Suzuki Swift will eventually run out with time and use, and we need to replace it. Using a small cross-head screwdriver, loosen the screw at the base of the key blade on the side where the logo is located, then pry along the edge with a blade and rotate the shell sideways.

Remove the block with the buttons and pry along the edge to separate the two halves; in one of them, you will find the battery compartment.

Remove it and insert a new CR1620 in its place, reassemble the two parts and insert them into the lower shell, rotate the upper one, secure it, and tighten the cross-head screw.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to Change the Battery in the Key Remote of a Suzuki Swift
How to Change the Battery in the Key Remote of a Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) These quick steps will guide you through the disassembly and battery replacement process for the key remote of a Suzuki Swift. Start by taking your r…
How to Replace the Remote Battery in the Suzuki Swift
How to Replace the Remote Battery in the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) In today's video, you will see how to replace the remote battery of the Suzuki Swift. This tutorial also applies to other contemporaneous models from…
Replacing the remote key battery for the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) This short and simple guide will show you how to disassemble and replace the battery in the remote key for the Suzuki Swift. First, take your remote …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos