Do it yourself
| ||||
|
Suzuki Vitara - Video tutorial
Model: Suzuki Vitara
LY
- Years 2015-2023 In this tutorial we can see how to replace the motor oil in the Suzuki Vitara, an extremely simple and fast operation. First of all, make sure that the engine is sufficiently cold, then go under the vehicle and remove the protective cover. Next, locate the drainage hole bolt, unscrew it using a 15mm socket wrench and let all the oil in the system drain out. At this point, all that's left to do is unscrew the old filter, tighten the replacement, put everything back together and pour the new oil through the top hole.
Posted on 19 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |