Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Trip A and Trip B on a Suzuki Sx4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

To reset Trip A and Trip B on a Suzuki Sx4, start by turning on the vehicle's instrument cluster without starting the engine. Press the button to the right of the rev counter to switch from 'trip A' to 'trip B'; to reset 'trip A', hold down the button until '0.0' appears.

Then press it again to switch to 'trip B', and hold the same button until '0.0' appears on 'trip B' as well. At this point, both Trip A and Trip B have been reset, and you can finally turn off the vehicle's instrument cluster.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to reset the service in the Suzuki SX4?
How to reset the service in the Suzuki SX4?
Suzuki Sx4 (2013-2021 / JY, MK 2) Resetting the service in the Suzuki SX4, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have …
How to reset the tire pressure on Suzuki SX4
How to reset the tire pressure on Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the tire pressure on the Suzuki SX4, you can follow these general steps. Turn on the car: make sure all tires are inflated to the correct pr…
Replacement of the Thermostat on the Suzuki SX4
Replacement of the Thermostat on the Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) This short guide will show you the main instructions on how to remove and replace the thermostat on the Suzuki SX4. First, open the bonnet of the veh…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos