Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Orbit 50

How do you disassemble the engine of the Sym Orbit 50?

Model: Sym Orbit 50
Part: Engine

Video tutorial

In order to disassemble the engine of the Sym Orbit 50, you will need to loosen the screws that hold it to its housing: you can locate the engine by loosening the screws that secure the panel in the rear of the footrest compartment and in the lower part of the underseat compartment.

Once these parts have been removed, you will need to unscrew the engine support screws, disconnect the connectors, and remove the intake and exhaust manifold; at this point, you can loosen the screws that hold the cylinder head and cylinder, removing them from their housing and freeing the piston from the corresponding connecting rod.


Posted on 3 April 2025 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on the Sym Orbit 125
How to Replace the Spark Plug on the Sym Orbit 125
Orbit 125 This guide provides instructions on how to remove and replace the spark plug of the Sym Orbit 125 scooter engine. First, place your scooter on the ce…
Engine Oil Change on Sym Orbit 125
Engine Oil Change on Sym Orbit 125
Orbit 125 In this tutorial, learn how to change the engine oil as part of the regular maintenance service on a Sym Orbit 125 scooter. First, position the scoot…
How to change the engine oil in the SYM Orbit 125 scooter?
How to change the engine oil in the SYM Orbit 125 scooter?
Orbit 125 In this tutorial, you will see how to change the engine oil in the SYM Orbit 125 scooter, a very simple and quick operation to be performed annually.…

How to Replace the Air Filter on the Piaggio SKR 125

To replace the air filter on the Piaggio SKR 125, loosen the bolts securing the filter box located on the left side of the bike, near the rear wheel. Once the cover is removed, you can access the filter underneath and pull it out from its housing. After removal, insert the new replacement part, close the filter box, and secure the cover with the bolts. After installation, start the engine to check that everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos