Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Belt and Rollers on Sym HD200

Model: Sym Hd 200 Evo
Part:

Video tutorial

In today's video, we will go through the steps to remove and replace the belt and rollers of the variator on the Sym HD 200 scooter. First, position your scooter on the centre stand and start by removing the clutch side cover by unscrewing all the screws; then unscrew the central nut of the fan using a socket spanner, as shown in the video.

At this point, we can remove the belt; then remove the variator to access the rollers. All that is left is to replace and reassemble everything, applying the reverse procedure!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Replace the Belt on the Sym HD 200i
How to Replace the Belt on the Sym HD 200i
Hd 200 Evo To replace the belt on the Sym HD 200i, loosen the screws securing the cover located near the rear wheel on the left side of the vehicle. Once the co…
How to Replace the Transmission on the Sym HD 200i
How to Replace the Transmission on the Sym HD 200i
Hd 200 Evo To replace the transmission on the Sym HD 200i, loosen all the bolts securing the cover of the casing located near the rear wheel on the left side of…
How to Replace the Radiator Fluid on the Sym HD 200
How to Replace the Radiator Fluid on the Sym HD 200
Hd 200 Evo In this video tutorial, you will learn how to bleed and replace the coolant on the Sym HD 200 scooter in simple steps. First, remove the plastics loc…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos