Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Outside Rearview Mirror of the Tata Magic Iris

Model: Tata Magic Iris MK 1 - Years 2010-2017
Part: Side mirror

In this video tutorial, you will learn how to replace the outside rearview mirror of the Tata Magic Iris in simple and quick steps. First, open the front door and start by removing the plastic cover located behind the outside rearview mirror; then use a Phillips screwdriver to remove the screws securing the mirror, allowing you to pull it out from the outside, as shown in the video. At this point, replace the mirror with the new one of the correct type; then apply the reverse procedure for reassembly!

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Tata Magic Iris?
Tata Magic Iris (2010-2017 / MK 1) To replace the battery on a Tata Magic Iris, lift the vehicle with a jack so that the left rear wheel is off the ground. Once lifted, loosen the bolt…
How to Replace the Rear Brake Shoes on a Tata Magic Iris?
How to Replace the Rear Brake Shoes on a Tata Magic Iris?
Tata Magic Iris (2010-2017 / MK 1) To replace the rear brake shoes on a Tata Magic Iris, lift the vehicle so that the corresponding rear wheel is off the ground. Once lifted, unscrew t…
How to Change the Engine Oil on a Tata Magic Iris?
How to Change the Engine Oil on a Tata Magic Iris?
Tata Magic Iris (2010-2017 / MK 1) To change the engine oil on a Tata Magic Iris, access the components underneath the vehicle to loosen the bolts securing the oil drain plug. Position…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos