Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the CV Boot on a Tata Magic Iris?

Model: Tata Magic Iris MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: CV boot

Video tutorial

To replace the CV boot on a Tata Magic Iris, lift the vehicle so that the wheel corresponding to the boot that needs replacement is not in contact with the ground. Then, loosen the mounting bolts to remove the wheel from the hub. Once the wheel is removed, unscrew the bolt that secures the end of the CV axle, pulling off the corresponding boot.

After the old boot is removed, install the new one by reassembling all previously removed components.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

Tata Magic Iris (2010-2017 / MK 1) Let's see how to replace the driveshaft on the Tata Magic Iris, a vehicle with relatively simple mechanics that suffered significant damage to this v…
Tata Magic Iris (2010-2017 / MK 1) In this video tutorial, you will learn how to replace the outside rearview mirror of the Tata Magic Iris in simple and quick steps. First, open the f…
Tata Magic Iris (2010-2017 / MK 1) To replace the battery on a Tata Magic Iris, lift the vehicle with a jack so that the left rear wheel is off the ground. Once lifted, loosen the bolt…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos