Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Tata
    3. :
  3. Altroz
    4. : Guide to replacing candles from Tata Altroz

Tata Altroz - Video tutorial

Model: Tata Altroz MK 1 - Years 2020-2024
Part: Spark plugs
Operation: Guide to replacing candles from Tata Altroz

Let's find out together, in this short and simple guide, how to replace the Tata Altroz engine spark plugs, following the instructions below. First we open the engine hood, pulling the lever from the inside, and we go to disconnect and remove the connectors of our spark plugs, thus removing the coils, as shown in the video. At this point we use a socket wrench with extension to unscrew and remove our spark plugs, replacing them with new ones (with the same pitch and the same thermal gradation); we hand screw and gently tighten our candles!


Posted on 8 May 2024 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos