Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Engine Oil and Oil Filter of the Tata Sumo

Model: Tata Sumo Gold - Years 2012-2019
Part: Engine oil

In this video tutorial, we will see how to remove and replace the engine oil and oil filter of the Tata Sumo in simple and quick steps. First, lift the vehicle and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter using the appropriate wrench to replace the cartridge with a new one, as shown in the video. At this point, open the hood and unscrew the fill cap, pouring in the new engine oil; finally, check the level using the dipstick!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter of the Tata Sumo
How to Change the Engine Oil and Oil Filter of the Tata Sumo
Tata Sumo (2012-2019 / Gold) .. see in this video tutorial how to remove and replace the engine oil and oil filter of the Tata Sumo by following these simple and quick steps. First,.. …
How to Replace the Oil Filter on a Tata Sumo?
How to Replace the Oil Filter on a Tata Sumo?
Tata Sumo (2012-2019 / Gold) To replace the oil filter on a Tata Sumo, access the lower part of the engine compartment near the left front wheel. Here, locate the oil filter, whi…
How to Change the Oil in a Tata Sumo
How to Change the Oil in a Tata Sumo
Tata Sumo (2012-2019 / Gold) To change the oil in the Tata Sumo, raise the front of the vehicle. Use a wrench to remove the oil drain plug and let the oil drain into a container.…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos