Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Tata Hexa

Model: Tata Hexa MK 1 - Years 2016-2020
Part: Cabin air filter

To replace the air conditioning filter, or pollen filter, on this vehicle, follow the instructions in the video and read the steps outlined below. First, sit in the passenger seat and open the glove compartment, then unclip the fasteners at the top to fully tilt it down. Underneath, you will find a plastic cover secured with two screws that you need to remove. Once the cover is off, you can access the filter, which you can pull out and replace with a new one. Then, reposition the cover, reattach the screws, and finally, reattach the glove compartment.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Engine Oil and Oil Filter on Tata Hexa
How to Replace Engine Oil and Oil Filter on Tata Hexa
Tata Hexa (2016-2020 / MK 1) Follow these steps to perform routine maintenance by replacing the engine oil and oil filter on the Tata Hexa. First, lift the vehicle and start remo…
How to Install a Dash Cam in the Tata Hexa
How to Install a Dash Cam in the Tata Hexa
Tata Hexa (2016-2020 / MK 1) As shown in the video, installing a dash cam in the Tata Hexa is quite simple. You need a basic understanding of electronics to install it. Start at …
How to Replace the Tire with the Spare on the Tata Hexa
How to Replace the Tire with the Spare on the Tata Hexa
Tata Hexa (2016-2020 / MK 1) In this brief and simple guide, let's go through the steps to remove and replace the tire with the spare on the Tata Hexa. First, gather the necessar…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos