Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Tata
    3. :
  3. Tiago
    4. : How to finish the exterior of the Tata Tiago with carbon fiber

Tata Tiago - Video tutorial

Model: Tata Tiago MK 1 - Years 2016-2023
Part: Bodywork
Operation: How to finish the exterior of the Tata Tiago with carbon fiber

To tell the truth this is not carbon fiber, but a plastic shell that mimics carbon fiber. These plastics can be found on all e-commerce platforms for a few euros, and they can be shaped very easily with the heat gun (but a normal hair dryer will do just fine) so that the uprights of our Tata Tiago can be enhanced by this beautiful design that gives more character. It is done very easily. The measurements are taken, applied to the upright and the plastic is molded onto the piece we want to cover. Then the excess is pushed back into the grooves with a hard plastic spatula. It also continues with the front uprights, until all the desired pieces are finished. It gives a very nice effect.


Posted on 30 August 2022 by ScegliAuto



How to replace the cabin filter in the Tata Tiago?
Tata Tiago (2016-2023 / MK 1) As we can see in this tutorial, replacing the cabin filter in the Tata Tiago is an extremely simple and fast operation. First of all let's position o
Where are the fuses of the Tata Tiago located?
Tata Tiago (2016-2023 / MK 1) The fuses of the Tata Tiago are contained within the appropriate fuse boxes that are installed on the vehicle: in this type of car, it is possible to
How do you replace the bulb of the Tata Tiago's mirror?
Tata Tiago (2016-2023 / MK 1) In order to replace the bulb of the Tata Tiago's mirror, you need to use an object to pry off the mirror cover: once it has been removed, you can uns

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos