Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Tata Bolt

Model: Tata Bolt MK 1 - Years 2014-2019
Part: Cabin air filter

As shown in this tutorial, replacing the cabin air filter in the Tata Bolt is a very simple and quick operation. It is located behind the panel at the junction between the dashboard and the center tunnel. First, pry off the panel using a flathead screwdriver, then locate the long rectangular door and unscrew the two indicated screws. Once done, remove the old filter, clean the inside of the housing from any debris, and install the replacement by following the reverse procedure.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat on a Tata Bolt
How to Replace the Thermostat on a Tata Bolt
Tata Bolt (2014-2019 / MK 1) In this brief guide, you will see the main instructions that will allow you to remove and replace the thermostat on a Tata Bolt. First, open the hood…
How to Reset the Service Light on the Tata Bolt?
How to Reset the Service Light on the Tata Bolt?
Tata Bolt (2014-2019 / MK 1) The procedure to reset the service light is the same for several Tata vehicles: Bolt, Tiago, Tigor, and Zest. After performing the maintenance, turn …
How to Replace the Key Battery on a Tata Bolt
How to Replace the Key Battery on a Tata Bolt
Tata Bolt (2014-2019 / MK 1) In this new guide for all of you with a Tata Bolt, we will discover the steps to correctly replace the small battery inside the key. First, get a sma…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos