Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on a Tata Bolt

Model: Tata Bolt MK 1 - Years 2014-2019
Part: Air filter

Want to replace the air filter yourself on this car model? In the video described here and in the description below, you will find all the useful instructions for performing the replacement. On this car model, the air filter is located in the engine compartment under the engine cover. Therefore, it is necessary to remove the engine cover by pulling it towards you and flipping it over to unscrew the mounting screws of the filter cover and remove it. Then, take the new filter and place it in the compartment, close the cover, secure the screws, and reposition the engine cover.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Changing the Transmission Fluid on the Tata Bolt
Guide to Changing the Transmission Fluid on the Tata Bolt
Tata Bolt (2014-2019 / MK 1) In this brief guide, you will see the main steps to drain and replace the transmission fluid on the Tata Bolt. First, raise the vehicle and locate th…
How to Reset the Service Light on the Tata Bolt?
How to Reset the Service Light on the Tata Bolt?
Tata Bolt (2014-2019 / MK 1) The procedure to reset the service light is the same for several Tata vehicles: Bolt, Tiago, Tigor, and Zest. After performing the maintenance, turn …
How to Replace the Key Battery on a Tata Bolt
How to Replace the Key Battery on a Tata Bolt
Tata Bolt (2014-2019 / MK 1) In this new guide for all of you with a Tata Bolt, we will discover the steps to correctly replace the small battery inside the key. First, get a sma…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos