Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery on the Tata Tiago

Model: Tata Tiago MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

Video tutorial

If you need to replace the battery on this vehicle, you can find instructions on how to proceed in this description and also refer to images in the video. First, open the hood and locate the battery on the right side, then disconnect the negative terminal first and then the positive terminal, and proceed to unscrew the bolts of the support plate at the base of the battery.

After that, you can pull the battery out of its housing and place the new one in. Tighten the bolts of the side plates again and reconnect the positive terminal first and then the negative.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

Tata Tiago (2016-2024 / MK 1) In this tutorial, you will see how to replace the battery in a Tata Tiago, a very simple and quick operation. Before proceeding, ensure that the key …
Tata Tiago (2016-2024 / MK 1) This brief guide shows the entire procedure necessary to replace the battery of a Tata Tiago, a model in production from 2016 to 2023. Start the oper…
Tata Tiago (2016-2024 / MK 1) In this short and simple guide, see how to remove and replace the front wipers of the Tata Tiago by following the instructions below. First, move to …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos