Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in a Tata Tiago?

Model: Tata Tiago MK 1 - Years 2016-2024
Part: Battery

In this tutorial, you will see how to replace the battery in a Tata Tiago, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by opening the hood, then unscrew the two bolts of the lower mounting bracket with a 13mm socket wrench. Next, loosen the negative terminal nut with a 10mm wrench, disconnect it, and repeat the process for the positive terminal. At this point, you can remove the old battery from the housing and install the replacement by following the reverse procedure.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Tata Tiago (2016-2024 / MK 1) If the key of your Tata Tiago suddenly stops working or has continuous signal drops, you need to replace the battery. This is a simple task that you …
Tata Tiago (2016-2024 / MK 1) This brief guide shows the entire procedure necessary to replace the battery of a Tata Tiago, a model in production from 2016 to 2023. Start the oper…
Tata Tiago (2016-2024 / MK 1) To replace the water pump in a Tata Tiago, open the hood to access the components inside the engine compartment; on the left side of the engine block…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos