Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the ECU on the Tata Safari Storme

Model: Tata Safari Storme MK 1 - Years 2012-2019
Part: Control unit

To replace the ECU on the Tata Safari Storme, open the hood to access the components inside the engine bay. The ECU is located immediately behind the battery, under the plastic cover; by removing this cover, unscrewing the mounting screws, and disconnecting the connectors, you can completely remove the old ECU to replace it with a new part. After replacement, position the new ECU, securing it with screws and covering it with the protective panel.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Tata Safari Storme (2012-2019 / MK 1) This guide will show you how to remove and replace the fuel filter on the Tata Safari Storme. First, open the hood and locate the fuel filter; you wi…
Tata Safari Storme (2012-2019 / MK 1) To replace the rear brake pads on the Tata Safari Storme, lift the vehicle with a jack so that the corresponding wheel is off the ground. Then, loose…
Tata Safari Storme (2012-2019 / MK 1) To replace the air filter on the Tata Safari Storme, open the hood to access the left side of the engine compartment. Here, you will find the filter …

Other guides you may be interested in

How to Open the Fuel Filler Cap of the 2020 Hyundai Tucson

The 2020 Hyundai Tucson has two methods for opening the fuel filler flap. Both methods can only be used if the key has been removed from the ignition and the engine is off. The first method involves removing the key from the ignition and keeping all the car locks open, then go to the flap and press it. This will open the flap. The second method is to stay in the car, remove the key from the ignition, and then press the fuel filler release button located on the left door.

Watch the video!


by ScegliAuto

More videos