Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to perform the regular maintenance service (engine oil change) on a TM Racing SMR 125. First, remove the bash plate located at the bottom by unscrewing the fastening screws; then, unscrew the oil drain bolt using a socket spanner, taking care of the magnet attached to the bolt itself. After draining all the old oil into a container, open the upper filler cap and insert the new oil with the correct specifications; then fill it up to the maximum level!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a TM Racing SMR 125?
How to Change the Engine Oil on a TM Racing SMR 125?
Smr 125 To change the engine oil on a TM Racing SMR 125, loosen the drain plug located at the bottom centre of the bike. This will allow all the oil to drain…
How to Change the Engine Oil of the TM Racing SMR 125?
How to Change the Engine Oil of the TM Racing SMR 125?
Smr 125 To change the engine oil of the TM Racing SMR 125, loosen the drain plug located at the central lower part of the bike: by unscrewing this plug, the …
How to Change the Gearbox Oil of the Tm Racing Smr 125
Smr 125 Follow the main instructions below to replace the transmission oil of the Tm Racing Smr 125 motorcycle. First, warm up the engine for a few minutes a…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos