Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Auris
    4. : Shocks

Toyota Auris - Shocks

Shocks Toyota Auris (2007-2012 / e 150)

Toyota Auris (2007-2012 / E150)
How do you replace the front shock absorber of the Toyota Auris?
In order to replace the front shock absorber of the Toyota Auris, you will need to lift the car with a jack so that the wheel corresponding to the shock …Read all…
Posted on 16 October 2025 by ScegliAuto
Toyota Auris (2007-2012 / E150)
Replacing Car Shock Absorbers
The purpose of shock absorbers is to create a system that slows down the movements of the suspension. If your car has high mileage, it is necessary to replace …Read all…
Posted on 1 March 2026 by ScegliAuto
Cigarette lighter (1) Airbag (2) Shocks (2) Antenna (1) Car stereo (2) Anti-roll bar (1) Roof rack bars (1) Battery (14) Spark plugs (1) Key (15) Timing belt (1) Checks and maintenance (15) Dashboard (1) MAF sensor (1) Rear bench seat (1) Headlight (3) Tail light (14) Fog lights (1) Air filter (1) Cabin air filter (7) Diesel fuel filter (4) Oil filter (3) Light bulb (5) Side marker bulb (1) Headlight bulb (21) Tail light bulb (13) Interior dome light bulb (2) License plate light (6) Engine oil (1) Clock (17) Door trim panel (5) Front bumper (2) Rear bumper (3) Brake pads (1) Hydraulic pistons (1) Tires (1) Shift knob (2) Instrument cluster (3) Wheel (1) Fuse box (28) Seat (3) Parking sensors (2) Suspension system (1) Side mirror (3) Warning light – error code (8) (24) Tire pressure warning light (10) Service warning light (61) Fuel cap (1) Windshield wipers (4) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos