Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Auris
  6. : Instrument cluster

Toyota Auris - Instrument cluster

Toyota Auris (2012-2018 / E180)
How to reset the service light on Toyota Auris 2016

The procedure required to be able to manually reset the maintenance light on your 2016 Toyota Auris is quite simple and really takes a few seconds to complete. …read all…
Posted on 5 June 2023 by ScegliAuto
Toyota Auris (2007-2012 / E150)
How to reset TPMS on Toyota Auris

When the low tire pressure warning light comes on on the instrument panel of our car, it is necessary to check the inflation pressures and, if necessary, …read all…
Posted on 8 May 2023 by ScegliAuto
Toyota Auris (2012-2018 / E180)
How to manually set the time of Toyota Auris

In this new mini guide of ours, we're going to find out how to manually change the time displayed on the system of your Toyota Auris (year 2012-2018) correctly …read all…
Posted on 10 December 2022 by ScegliAuto
Toyota Auris (2007-2012 / E150)
How to reset Toyota Auris 2008 oil warning light

If every time you start your 2008 Toyota Auris the oil warning light on the instrument panel comes on even though you have already changed the fluid and …read all…
Posted on 30 July 2022 by ScegliAuto

Cigarette Lighter (1) Airbags (1) Shock absorbers (1) Antenna (1) Car stereo (1) Anti roll bar (1) Roof Rack Bars (1) Battery (9) Spark plugs (1) Key (8) Timing belt (1) -board computer (4) Checks and maintenance (37) Oil pan (1) Headlight (1) Tail light (10) Air filter (1) Cabin air filter (7) Diesel filter (4) Oil filter (3) Light bulb (5) Headlight bulb (12) Rear light bulb (8) Interior lights ceiling light bulb (2) License plate light (2) Engine oil (1) Door panel (4) Front bumper (1) Rear bumper (1) Hydraulic pistons (1) Tires (3) Gear Shift Knob (2) Instrument cluster (4) Wheel (1) Fuse box (10) Seat (2) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos