Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Auris
  6. : Door panel

Toyota Auris - Door panel

Toyota Auris (2007-2012 / E150)
Removing the Toyota Auris door panel

In today's video tutorial we will see the steps on how to remove the door panel of a Toyota Auris first series. First we open the front door and start by …read all…
Posted on 19 March 2024 by ScegliAuto
Toyota Auris (2012-2018 / E180)
Removal of the rear door panel on Toyota Auris

Remove the armrest cover by levering it underneath with a plastic lever and unscrew the screw underneath with a Phillips screwdriver. At this point, as shown …read all…
Posted on 24 February 2024 by ScegliAuto
Toyota Auris (2012-2018 / E180)
How to remove the door panel of a Toyota Auris

Before we begin, we will have to go and open the door of our Toyota Auris. So let's start by disengaging and removing the door panel inserts. By doing so, we …read all…
Posted on 11 January 2024 by ScegliAuto
Toyota Auris (2007-2012 / E150)
How to remove the door panel of a Toyota Auris

How to remove the door panel of a Toyota Auris? We disconnect the battery terminals in the engine compartment; using a screwdriver, unscrew the screws located …read all…
Posted on 22 November 2023 by ScegliAuto

Cigarette Lighter (1) Airbags (1) Shock absorbers (1) Antenna (1) Car stereo (1) Anti roll bar (1) Roof Rack Bars (1) Battery (9) Spark plugs (1) Key (8) Timing belt (1) -board computer (4) Checks and maintenance (37) Oil pan (1) Headlight (1) Tail light (10) Air filter (1) Cabin air filter (7) Diesel filter (4) Oil filter (3) Light bulb (5) Headlight bulb (12) Rear light bulb (8) Interior lights ceiling light bulb (2) License plate light (2) Engine oil (1) Door panel (4) Front bumper (1) Rear bumper (1) Hydraulic pistons (1) Tires (3) Gear Shift Knob (2) Instrument cluster (4) Wheel (1) Fuse box (10) Seat (2) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos