Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel on a Toyota Auris

Model: Toyota Auris E180 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Start by opening the door of your Toyota Auris. Unclip the panel inserts: using a plastic tool or your hands, unclip the panel inserts of the door.

These are usually located along the edge of the panel. This will allow you to reach the screws that secure the panel to the door.

Once you reach the screws, unscrew them using an appropriate screwdriver. Make sure to remove all the screws holding the panel in place.

Remove the cover near the exterior side mirror: look for a cover near the exterior side mirror. Remove it to access the electrical connector of the side mirror.

Once the connector is exposed, carefully disconnect it. Now you can unclip the panel from the door. Carefully lever to avoid damaging the panel or the fixing clips.


Posted on 18 December 2024 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Toyota Auris
How to Remove the Door Panel of a Toyota Auris
Toyota Auris (2007-2012 / E150) How do you remove the door panel of a Toyota Auris? Disconnect the battery terminals located in the engine bay; use a screwdriver to unscrew the scre…
How to Remove the Door Panel on a Toyota Auris
How to Remove the Door Panel on a Toyota Auris
Toyota Auris (2012-2018 / E180) Before starting, open the door of your Toyota Auris. Begin by prying out and removing the inserts from the door panel. This will expose the screws th…
Removing the Door Panel of a Toyota Auris
Removing the Door Panel of a Toyota Auris
Toyota Auris (2007-2012 / E150) In today's video tutorial, you will see the steps to remove the door panel of a first-generation Toyota Auris. First, open the front door and start b…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos