Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel on a Toyota Auris

Model: Toyota Auris E180 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Remove the armrest cover by prying underneath with a plastic trim tool and unscrew the underlying screw with a cross-head screwdriver. At this point, as clearly shown in the video, move the plastic cover at the height of the opening handle and unscrew the screw underneath here as well.

Done! On this model of car, these are the only screws holding the panel to the door; the rest is simply clipped in. Therefore, insert a trim tool or plastic wedge into the gap around the panel and pull it out bit by bit from the door, then disconnect the cables.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of a Toyota Auris
Removing the Door Panel of a Toyota Auris
Toyota Auris (2007-2012 / E150) In today's video tutorial, you will see the steps to remove the door panel of a first-generation Toyota Auris. First, open the front door and start b…
How to Remove the Door Panel of a Toyota Auris
How to Remove the Door Panel of a Toyota Auris
Toyota Auris (2007-2012 / E150) How do you remove the door panel of a Toyota Auris? Disconnect the battery terminals located in the engine bay; use a screwdriver to unscrew the scre…
How do you remove the rear bumper of the Toyota Auris?
How do you remove the rear bumper of the Toyota Auris?
Toyota Auris (2007-2012 / E150) In order to remove the rear bumper of the Toyota Auris, you will need to use a tool to pry off the rivets located at the bottom of the bumper and ins…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos