Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Auris
    4. : Oil filter

Toyota Auris - Oil filter

Toyota Auris (2012-2018 / E180)
How do you replace the oil filter of the Toyota Auris Hybrid?
In order to replace the oil filter of the Toyota Auris Hybrid, you need to access the bottom part of the car so that you can locate the engine protection …read all…
Posted on 16 August 2023 by ScegliAuto
Toyota Auris (2007-2012 / E150)
Toyota Auris oil filter replacement
Replacing the oil filter of a Toyota Auris? Let's see how it disassembles. We lift the vehicle onto a column bridge, unscrew the oil filter container (we use a …read all…
Posted on 10 December 2023 by ScegliAuto
Toyota Auris (2007-2012 / E150)
Changing the engine oil filter of a Toyota Auris
Let's see in this video how to change the engine oil filter of a Toyota Auris. First of all we lift our car on a column bridge or on a jack and we go to …read all…
Posted on 9 October 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Shock absorbers (1) Antenna (1) Car stereo (1) Anti roll bar (1) Roof Rack Bars (1) Battery (9) Spark plugs (1) Key (8) Timing belt (1) -board computer (4) Checks and maintenance (37) Oil pan (1) Headlight (1) Tail light (10) Air filter (1) Cabin air filter (7) Diesel filter (4) Oil filter (3) Light bulb (5) Headlight bulb (12) Rear light bulb (8) Interior lights ceiling light bulb (2) License plate light (2) Engine oil (1) Door panel (4) Front bumper (1) Rear bumper (1) Hydraulic pistons (1) Tires (3) Gear Shift Knob (2) Instrument cluster (4) Wheel (1) Fuse box (10) Seat (2) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos