Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Auris
    4. : License plate light

Toyota Auris - License plate light

Toyota Auris (2012-2018 / E180)
How to replace license plate light bulbs in Toyota Auris?
In this tutorial we can see how to replace the license plate light bulbs in your Toyota Auris, an extremely simple and fast operation. First of all, make sure …read all…
Posted on 23 April 2023 by ScegliAuto
Toyota Auris (2007-2012 / E150)
How to replace the license plate bulb on Toyota Auris
How to replace the license plate bulb of a Toyota Auris? Let's see in this video how to replace the piece: with a lever we press the clamping clips of the …read all…
Posted on 22 November 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Shock absorbers (1) Antenna (1) Car stereo (1) Anti roll bar (1) Roof Rack Bars (1) Battery (9) Spark plugs (1) Key (8) Timing belt (1) -board computer (4) Checks and maintenance (37) Oil pan (1) Headlight (1) Tail light (10) Air filter (1) Cabin air filter (7) Diesel filter (4) Oil filter (3) Light bulb (5) Headlight bulb (12) Rear light bulb (8) Interior lights ceiling light bulb (2) License plate light (2) Engine oil (1) Door panel (4) Front bumper (1) Rear bumper (1) Hydraulic pistons (1) Tires (3) Gear Shift Knob (2) Instrument cluster (4) Wheel (1) Fuse box (10) Seat (2) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos