Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Auris
  6. : Light bulb

Toyota Auris - Light bulb

Toyota Auris (2007-2012 / E150)
How do you replace the rear headlight bulb of the Toyota Auris?

The replacement of the rear headlight bulb on the Toyota Auris is done by opening the rear hatch, so that access to the side of the trunk, where the bulb to be …read all…
Posted on 2 March 2024 by ScegliAuto
Toyota Auris (2012-2018 / E180)
How do you replace the light bulb on the Toyota Auris?

In order to replace the headlight bulb on the Toyota Auris we must first clear access to the rear of the headlight. This can be done by removing the first cap, …read all…
Posted on 6 October 2022 by ScegliAuto
Toyota Auris (2007-2012 / E150)
How do you replace the Toyota Auris rear light bulb?

In order to replace the rear light bulb on the Toyota Auris, you need to go and open the tailgate, accessing the trunk. Here it will be necessary to detach the …read all…
Posted on 6 December 2022 by ScegliAuto
Toyota Auris (2012-2018 / E180)
Replace the Toyota Auris headlight bulb

Today we are going to see how to replace the headlight bulb of a Toyota Auris. First of all, we open the front hood and we go to identify the internal and rear …read all…
Posted on 23 March 2024 by ScegliAuto
Toyota Auris (2012-2018 / E180)
How to replace the Toyota Auris headlight bulb?

In order to replace the Toyota Auris headlight bulb, the hood must be opened to gain access to the engine compartment. In this way, it will be possible to …read all…
Posted on 11 March 2024 by ScegliAuto

Cigarette Lighter (1) Airbags (1) Shock absorbers (1) Antenna (1) Car stereo (1) Anti roll bar (1) Roof Rack Bars (1) Battery (9) Spark plugs (1) Key (8) Timing belt (1) -board computer (4) Checks and maintenance (37) Oil pan (1) Headlight (1) Tail light (10) Air filter (1) Cabin air filter (7) Diesel filter (4) Oil filter (3) Light bulb (5) Headlight bulb (12) Rear light bulb (8) Interior lights ceiling light bulb (2) License plate light (2) Engine oil (1) Door panel (4) Front bumper (1) Rear bumper (1) Hydraulic pistons (1) Tires (3) Gear Shift Knob (2) Instrument cluster (4) Wheel (1) Fuse box (10) Seat (2) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos