Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the license plate light of a Toyota Auris

Model: Toyota Auris E210 - Years 2018-2024
Part: License plate light

Today we will see how to change the license plate lights of a Toyota Auris, a model produced starting from the year 2018. This operation is not very complex and we can do it independently. So, let's start the operation immediately by removing the license plate light fixture. To do this, we need to insert a screw into a specific hole on the side of the fixture and then extract it as shown in the video. Then, using pliers, we carefully grab the old bulb and remove it. Once this is done, we can insert a new bulb and then close everything back up to complete the job.

Posted on 20 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Toyota Auris
How to Replace the Battery in a Toyota Auris
Toyota Auris (2012-2018 / E180) To replace the battery in a Toyota Auris, open the bonnet to access the components inside the engine bay. On the right side, you will find the batter…
How to Replace the Front Headlamp Bulbs on a Toyota Auris
How to Replace the Front Headlamp Bulbs on a Toyota Auris
Toyota Auris (2007-2012 / E150) Learn how to replace the bulbs located in the front headlamp of a Toyota Auris. Open the bonnet by pulling the lever located at the bottom right of t…
How to Remove the Door Panel of a Toyota Auris
How to Remove the Door Panel of a Toyota Auris
Toyota Auris (2007-2012 / E150) How do you remove the door panel of a Toyota Auris? Disconnect the battery terminals located in the engine bay; use a screwdriver to unscrew the scre…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos