Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Belta Vios
    4. : 2005-2012 (Xp90)

Toyota Belta Vios Years 2005-2012 (Xp90)

Toyota Belta Vios (2005-2012 / Xp90)
How do you deactivate the alarm of the Toyota Vios?
In order to deactivate the alarm of the Toyota Vios, the simplest procedure is to remove its fuse: this way, the electrical circuit that controls the alarm's …read all…
Posted on 30 November 2023 by ScegliAuto
Toyota Belta Vios (2005-2012 / Xp90)
How do you replace the battery of the Toyota Vios remote control?
In order to replace the battery of the Toyota Vios remote control, you need to use a thin object like a screwdriver to pry open the bottom part of the device: …read all…
Posted on 19 November 2023 by ScegliAuto
Toyota Belta Vios (2005-2012 / Xp90)
How do you replace the serpentine belt of a Toyota Vios?
The replacement of the Toyota Vios's serpentine belt is done by opening the hood, so that access to the components inside the engine compartment is obtained: …read all…
Posted on 7 April 2023 by ScegliAuto
Toyota Belta Vios (2005-2012 / Xp90)
How do you replace the V-belt on the Toyota Vios?
In order to replace the V-belt on the Toyota Vios, you need to go and open the bonnet so that you can access the components inside the engine compartment: the …read all…
Posted on 26 May 2023 by ScegliAuto
Toyota Belta Vios (2005-2012 / Xp90)
How do you replace the Toyota Vios rear speaker?
In order to replace the rear speaker of the Toyota Vios, you need to lift the rear seat of the car, so that you can access the underlying components. Here it …read all…
Posted on 17 May 2023 by ScegliAuto
Toyota Belta Vios (2005-2012 / Xp90)
How do you remove the Toyota Belta dashboard center panel?
In order to remove the central panel of the Toyota Belta dashboard, you need to detach the cover located in the lower part of the panel, immediately behind the …read all…
Posted on 2 May 2023 by ScegliAuto
Toyota Belta Vios (2005-2012 / Xp90)
How do you remove the front bumper of Toyota Belta Vios?
In order to remove the front bumper of the Toyota Belta Vios you have to open the hood so that you go to loosen the screws that secure the bumper from the top. …read all…
Posted on 30 April 2024 by ScegliAuto
Loudspeaker (1) Battery (2) Key (2) V-belt (2) Checks and maintenance (2) Dashboard (1) Air filter (1) Grille (2) Engine oil (1) Front bumper (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos