Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Belta Vios
    4. : How do you replace the battery of the Toyota Vios remote control?

Toyota Belta Vios - Video tutorial

Model: Toyota Belta Vios Xp90 - Years 2005-2012
Part: Key
Operation: How do you replace the battery of the Toyota Vios remote control?

In order to replace the battery of the Toyota Vios remote control, you need to use a thin object like a screwdriver to pry open the bottom part of the device: this way, the two halves that make up the remote control can be completely separated and the battery inside can be extracted. After removing the old battery, you can insert the new one into its housing, and then close the remote control by inserting the back panel; once the replacement is done, you need to verify that the device functions properly.


Posted on 19 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos