Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Belta Vios
  6. : How do you replace the serpentine belt of a Toyota Vios?

Toyota Belta Vios - Video tutorial

Model: Toyota Belta Vios Xp90 - Years 2005-2012
Part: V-belt
Operation: How do you replace the serpentine belt of a Toyota Vios?

The replacement of the Toyota Vios's serpentine belt is done by opening the hood, so that access to the components inside the engine compartment is obtained: on the left side of the compartment, it will be possible to locate the alternator, on which the pulley around which the belt rotates will be present. Loosening the central pin of this pulley will allow the belt to be removed and removed from its housing. After it has been removed, it will be possible to insert the new one, positioning it around the respective pulleys and then verifying that everything works correctly.


Posted on 7 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos